Can You Use 1/2 Inch Drywall Ceiling?

Do you hang drywall on ceiling first?

Hanging Drywall From the Top Down Hang drywall on the ceiling first, then the walls.

Check the ceiling for bowed joists using a 4-ft.

are of no concern, but seriously warped framing will require you to use drywall shims–long strips of 1/8- or 1/16-in..

What kind of drywall do you use for a bathroom ceiling?

Conventional drywall is commonly used for ceilings in non-shower/tub areas of bathrooms, although some builders prefer to use moisture-resistant drywall — aka greenboard — instead. Moisture-resistant drywall is similar to standard drywall but has face paper that’s treated for extra resistance to mold and moisture.

Is mold resistant drywall required by code?

Is mold resistant drywall required by code? Technically, the building code does allow water resistant sheetrock installed on ceilings of tubs and showers, but it must be nailed to ceiling joists that are spaced no more than 12″ apart.

Can Drywall be used for ceiling?

Drywall is the go-to material used for interior walls and ceilings in all types of buildings. It’s only made of gypsum covered with paper, but this amazing material can be found nearly every building in the country.

Is there a difference between ceiling drywall and regular drywall?

1/2″ gypsum ceiling board – ceiling board is simply drywall rated to have less sag and less pulling properties. This is normally what we use on jobs. It is not always available at big box in all lengths but we usually find it. … See this PDF to compare ceiling board to regular wall board.

Can you use 1/2 inch drywall ceiling?

1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. 5/8-inch: These panels are commonly used for ceilings, or for walls that require a prescribed fire-resistant rating.

How much does it cost to install a drywall ceiling?

Install Ceiling Drywall national average cost The national average materials cost to install ceiling drywall is $0.53 per square foot, with a range between $0.45 to $0.61. The total price for labor and materials per square foot is $2.15, coming in between $1.91 to $2.40.

Should ceiling box be flush with drywall?

Position Box The front edge of the box must be flush with the finished wall surface, usually 1/2-inch-thick drywall. … You can use a scrap of drywall to position the box.

How much does it cost to drywall a 2000 square foot house?

Cost to Drywall a Whole HouseHouse SizeDrywall Square FeetPrice1,5005,000-6,500$5,000 – $19,5002,0006,500-7,900$6,500 – $23,7002,5007,900-9,400$7,900 – $28,2003,0008,000-10,000$8,000 – $30,000

Is lightweight drywall good for ceilings?

There is no appreciable design advantage for ultralight drywall over standard drywall. This is a material that can be used for all wall and ceiling finish surfaces in any residential application.

How many screws do I need for ceiling drywall?

The general answer, you should use at least one drywall screw every 10-12 inches. This means that for a 4′ x 12′ sheet of drywall you will probably use around 50 screws on the entire sheet.

Can you hang drywall on 24 centers?

Always use 5/8 on 24″ centers. You can rent a drywall lift from “The Big Boxes” for about $30 a day so you won’t kill your back trying to lift & shift the rock. If you use 1/2 it will sag eventually. When it sags you will get the “Amphitheater look” between each joist.

Can you use regular drywall in a bathroom ceiling?

Drywall can be used above the non-tub and shower areas of your bathroom. However, some areas of your bathroom that are exposed to water and moisture such as the expanse just above the shower will necessitate the use of greenboard or drywall that is properly moisture resistant.

What thickness of drywall should I use on the ceiling?

The thicker ⅝” drywall is the standard for ceilings. You don’t want to use ½” or ⅜” for ceilings, as over time it will sag downwards in between rafters. Also, ⅝” is the standard thickness for fire-resistant or fire-code drywall, commonly found in garages.